Mold always means one thing: a moisture problem. Spraying bleach over it hides the stain and leaves the cause behind. Millers tests with an independent lab, contains the area, removes mold to standard with HEPA filtration, and fixes the moisture source so it doesn't come back — then proves it with clearance testing.
Anyone can wipe a wall. Doing mold right means finding the moisture feeding it, containing spores so they don't spread, removing affected material safely, and verifying the air is clean when you're done.
We start with an inspection and, when needed, independent air and surface sampling sent to a third-party lab — so the results are objective, not something we graded ourselves. Our Pin Point moisture mapping finds exactly where the water is coming from.
Then we set full containment with negative-air machines and HEPA filtration, remove the mold and any unsalvageable material, and treat the area with antimicrobial. Critically, we correct the moisture source — the leak, the humidity, the drainage — because mold without moisture can't return.
Finally, post-remediation clearance testing confirms the space is safe. If reconstruction is needed, our in-house crew handles it. Honest testing, honest work — the family-owned standard since 1974.
Mold is a symptom — moisture is the cause. Our Pin Point Process locates the water source, proves the extent with independent testing, and verifies the air is clean before we close the job.
We find the hidden leak or humidity feeding the mold — not just the visible growth.
Samples go to a third-party lab, so the results are objective and defensible.
We verify containment and airflow so spores never spread to clean areas.
Final testing proves the space is clean before we hand it back.
A process backed by science and technology — resulting in irrefutable data and pinpoint accuracy throughout your remediation. We prove the mold is gone with independent clearance testing, and we fix the moisture source so it can't return. The other guys spray; we test, remove, and verify.
A documented, standards-based sequence — from the first test to the clearance that proves it's gone.
We assess the growth and, when needed, send independent air and surface samples to a third-party lab.
Infrared and moisture mapping locate the leak or humidity source feeding the mold.
Containment barriers and negative-air machines keep spores from spreading.
We safely remove mold and affected materials, then HEPA-filter and scrub the air.
We correct the moisture problem — because mold without moisture can't come back.
Post-remediation testing confirms the space is clean, then we rebuild what was removed.
Behind walls, under floors, in the attic, or across a commercial building — we find it and remove it.
Damp foundations and poor drainage make basements the #1 mold spot in NW Ohio.
Humidity, poor ventilation, and roof leaks feed growth in the wettest rooms.
Mold that took hold after a leak or flood that wasn't dried to standard.
We test, contain, and remove per standards — no guesswork, no scare tactics.
Growth in the system spreads spores building-wide; we contain and decontaminate it.
Documentation and clearance testing landlords, tenants, and insurers can rely on.
Every hour after a loss compounds the damage. Live dispatch, pre-staged trucks, and a 60-minute on-site target — even at 2 a.m.
Infrared, moisture meters, and LiDAR mapping find hidden damage and prove the work is done right. Science, not spray.
We document the loss, talk to your adjuster, and bill insurance directly when we can. Same Xactimate pricing the carriers use — and it's your right to choose Millers.
Mitigation, contents, and full reconstruction under one roof. No handing your property to a subcontractor you've never met.
5.0 average across Google & Yahoo
Awesome job on my house gentleman! Always will recommend these folk!
We had an emergency situation at a rental property that occurred early on a Saturday morning when I was out of town - hours away. I called Miller's and they had someone onsite at the property...
Curtis and the team at Millers were great. They responded to my emergency call immediately, and were on site cleaning up the water within hours and restoring a safe living environment. I recommend...
One accountable crew handles the whole recovery — here's what commonly goes hand-in-hand with this service.
We don't diagnose health effects — that's a question for a medical professional. What we can tell you is that any significant mold growth should be tested, contained, and removed properly, because disturbing it without containment spreads spores. We handle it to IICRC standards and verify the result with clearance testing.
Not always — visible mold with an obvious source can often go straight to remediation. But independent testing is worth it when the source is unclear, when you need objective documentation for a sale or claim, or to confirm the air is clean afterward. When we test, samples go to a third-party lab.
Most residential jobs run a few days, depending on the size of the affected area and how much material has to be removed. We'll give you a clear scope up front — and we don't rush the clearance step.
Not if the moisture is fixed. Mold can't grow without water, so correcting the leak, humidity, or drainage problem is the most important part of the job — and it's exactly where spray-and-go companies fall short.
Sometimes — it often depends on whether the underlying water cause was sudden and covered. Coverage is your adjuster's call. We document the source and the scope thoroughly so your adjuster has everything they need.
Yes. We find the moisture source with Pin Point mapping and correct it, and our in-house crew rebuilds anything that had to be removed — all under one roof.
Family-owned crews dispatched from Bowling Green, Toledo, and Ann Arbor — serving the greater Toledo region and beyond.
Don't disturb it — that spreads spores. Call us and we'll test, contain, and remove it the right way.
